Homepage | Home | Bookmarke
Member

Guangzhou Zhenroumei Chemical Coatings Limited


Products
  • No Category
Search
 

Friends links
  • No link
You are here: Home » Products » Clear Coat Series
Clear Coat Series
Click image to view full size image
Product: Views:194Clear Coat Series 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2017-11-27 00:56
  Inquiry
Details
MARSIDE Series Product Name/Model:Clear Coat Series Characteristic: 1、 MSK-8000Clear Coat :Two- component 880 clear coat with super-high density and solid, deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies to senior cars, suitable for overall refinish, quality and performance compare favourably with many imported clear Coats 2、 GH-5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss, high hardness, excellent weathering and chemical resistance. 3、 GH-3000Clear Coat:High gloss 380 clear coat, with high richness, good levelling property, easy construction, high hardness, excellent chemical and weathering resitance. Be paint film in lower temperature. Application in Medium, Senior car, MPV, Bus. 4、 MSK-2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easy construction, fast dry, good pretective power and weathering resistance, save cost and time during refinish.Application in standard car, construction machinery. Substrates   1K Basecoat. Mixing Ratio Clear Coat  Hardener Thinner 2 1 0.2-0.5 A  、<15℃ :90 Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner Spray Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C, Pot-Life At 25℃ 4 hours with fast hardener. 4 hours with standard hardener or slow hardener. ReTreatment There are particles or runs after spray, sand affected area with P2000 sand paper after thorough drying, then polish to solve the problem. Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm² Suction Feed: 1.4-1.6mm 4-5kg/cm² Spray Technology Coats&Thickness: 2-3 coats, total 25-35um Flash-Off Time: At 25°C, 5-10 minutes between two coats, Air-Drying Time: Allow 10-15 minutes air drying time before force drying Drying Time Temperature   Dust Free Tack Free   Dry to Handle Dry to Test 25°C  30 minutes  2 hours  8 hours 6 days 70°C 5 minutes 10 minutes 25 minutes  60 minutes Shelf Life 2 years in original sealed can, cool and dry place at 20℃. Package 5L×4 or 2.5L×8 or 5L+2.5L+1L Note: 1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better to allow a full bake at 60°C. 2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent. 3. The products mixed with hardener should be used up soon and can not be restore for future use; clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Inquiry